Phone: 845-638-3100
800-310-5741 (In USA)
Fax: 845-638-6688
Address:
216 Strawtown Rd
New City, NY 10956
Home
Used Centrifuges
Surplus Separators
Bio Diesel
Centrifuge Types
All Centrifuges
Disc Bowl
Basket Centrifuges
Decanters
Pieralisi
Applications:
General Applications
Biodiesel, Green fuel
Coolant Recycling
Cold Headers Fasteners lube oils
Gas Turbine Fuel Treatment
GaAs Ceramics Optics
Oilfield Refineries
Optical Glass
Paint Booths Vibratory
Power Plant, Oil Purifier
Wastewater
Centrifuge Models:
High Speed:
Alfa Laval MAB 103 MAB 104
Alfie 400 Alfie 500 Alfie 200
Alfa Laval BTPX 205 Biotech
Biodiesel MAPX 205
MOPX 213, MAPX 313
WSPX 303 AlfaPure Z3
Decanter Centrifuges:
Sharples P660, P 1500
Alfa Laval NX 309
Alfa Laval NX 418 NX 620
DMNX 414, 418, 518
Basket centrifuges:
Microseparator
TSK 50M 80M CF 55 CF 85
TSK 100A, TSK 150A, CF 105, CF 155
Parts and Service:
Separator Parts
Centrifuge Repair
Info Request
Contact us
Spanish Translation
|
Mars Tech Decanter Centrifuge Separators
Mars Tech offers Decanter Centrifuges for drilling mud, solids
control, drilling fluid cleaning, mud cleaning and treatment equipment,
oil and gas well centrifuges, oilfield, refinery tank bottom cleaning
Mars Tech centrifugal separators and decanter centrifuges for the oilfield
|
Reconditioned Alfa Laval DMNX 414 decanter centrifuge for oilfield drilling
mud, wastewater, oily waste |
Mars Tech offers a wide range of scroll-type
decanter centrifuges for the following applications
- Oil Field, Drilling Mud treatment
- Mud Cleaning, Barite Recovery
- solids control, Mud Cleaner centrifuge
- Waste Oil, Refinery Tank Cleaning, Sludge Removal
- Oily wastes, tank bottoms, slop oils, remediation
- Industrial Wastewater, Sludge Dewatering
- Food, Juices, Fish, Rendering
- Chemical, Pharmaceutical
- Cow Manure, Pig Manure
|
Available used and reconditioned Decanter
Centrifuges:
- Alfa Laval NX 418, DMNX418, DMNX414, NX 309
- Sharples P3400 Brandt made HS-3400, P5000 P5400 P660
- Pieralisi Baby, RS 600, Jumbo, Giant
- Swaco Dresser DMNX 414, DMNX 518
- Dorr Oliver 16L
- Westfalia
Decanter Centrifuge Parts
- Long Tapered Nozzles for Solids discharge ports
- DNMX 518 and DMNX 418 Gearbox 350 kpm
- Tungsten Carbide Discharge Bushings
- Swaco split pillow blocks
|
Selection Criteria for Oilfield Centrifuge
Equipment
DMNX 418 and DMNX 518 Centrifuges for unweighted mud
- Consider DMNX 418 for unweighted hole applications. High volume 418
has the ability to process 200 gpm and discard over 2,500 lb/hr at 10-12
micron cut size to save money.
- Suitable for Water based and oil based drilling mud
- higher savings for oil based mud
|
Also available reconditioned 350 kpm gearbox
for DMNX 418 and DMNX414
Reconditioned secondhand Swaco DMNX 518 Decanter Centrifuge
complete on Skid with main motor, backdrive motor and control panel
|
DMNX418 and Swaco DMNX518 Centrifuges for Secondary
Recovery Applications
- The high speed DMNX 418 can save up to 50% of haul away costs
- It removes most of the fines over 3 microns
- Returns expensive liquid phase of water base muds for reuse
- Closed loop operation is possible
|
Swaco DMNX 414 Decanter Centrifuge
- An Oilfield workhorse for either Weighted or Unweighted Mud
- Weighted Mud: DMNX 414 can recover up to 95% of the barite on a weighted system while rejecting low-gravity drill solids from the drilling mud.
- Un weighted Mud: On unweighted mud systems the DMNX 414 returns the costly liquid phase of the drilling fluid while effectively discarding fine drill solids within the range of 5-7 microns
|
Total Drill Solids Controls
- The DMNX 518 / DMNX 418 centrifuge works well with other solids-control equipment, thereby maximizing solids control effectiveness.
- The 518 / 418 is especially effective when used as a secondary stage with the Swaco or Alfa Laval 414 centrifuge when recovering barite.
- It further clarifies the liquid phase from the 414 centrifuge, thus saving money on the expensive drilling fluids.
|
Other Applications for DMNX 418, DMNX518 and DMNX 414
- Refinery Tank Bottom Cleaning
- Remediation
- Slop Oil Plants, Oily Waste Ponds
- Waste Oil Recovery
|
Home | All Centrifuges | Basket Centrifuges | Decanter Centrifuges | Disc Bowl Centrifuges | Centrifuge Applications | Biodiesel, Green Fuel | Fasteners, Cold Header Lube | Gas Turbine Fuel Treatment | GaAs Recovery | Oilfield, Refinery Solids Control | Photonics, Optics, Quartz | Paint Booths, Vibratory Finishing | Alfa Laval BTPX 205 Biotech | Alfa Laval MAB, 103 MAB 104, OCU S 103 | Alfa Laval Alfie 400 | WSPX 204, Alfa Pure Z3 Coolant Centrifuge | CF 105G, TSK 150A | Sharples P660, P 880 Decanter | Used Centrifuges | Surplus Centrifuges | Centrifuge Parts | Centrifuge Repair | Information Request | Contact us
Mars Tech
Division of Kendale and Co.,Inc
216 Strawtown Road, New City, NY 10956
Phone: (845) 638-3100, Fax: (845) 638-6688
Toll Free: 1-800-310-5741 (USA only)
email: sales@marstechusa.com
February 14, 2010 8:49 PM
Copyright © Mars Tech 2004 - 2008
|