Phone: 845-638-3100
Spanish Translation |
Mars Tech used reconditioned decanter centrifuges for liquid solid separationReconditioned Alfa Laval NX 309 Decanter Centrifuge on stand, motors and controls Mars Tech offers decanter centrifuges for industrial, chemical, pharmaceutical, food , dairy and municipal liquid solid and liquid liquid separation applications. Suitable for crushed or pressed oil seeds. Produces clean oil and dry meal byproduct. |
Decanter type centrifuges are proven suitable for high solids separation of particulates from industrial, chemical, pharmaceutical liquids and municipal wastewater dewatering. |
Typical decanter applications
|
|
|
Decanters for continuous clarification of liquid solid suspensionsWorking Principle:Typically a decanter centrifuge consists on a cylindrical and conical bowl sections on pillow blocks. Centrifugally separated solids are moved and discharged through sludge ports by means of a conveyor or scroll of the same contour within the bowl. The separation can be arranged for either clarification or purification. The relative speed between the bowl and the scroll is controlled by a planetary or cyclonic gearbox which is an integral and most important part of the decanter centrifuge. The scroll is generally hard surfaced for wear and erosion protection. Purifier Design or a three phase decanter is suitable for separating oil, water and solids |
Decanter centrifuge model ALFA LAVAL NX 309 used reconditionedClarifier Design or a two phase decanter is suitable for separating solids from liquids |
|
Stainless Steel horizontal solid bowl Alfa Laval NX 309 Decanter centrifuge
|
NX 309S-11 reconditioned three phase decanter centrifuge with main motor and control panel on a mounting stand. Use for continuous purification or concentration of liquid/liquid/solid suspensions. (eg. Oil, water, solids separation) Suitable for Biodiesel, pressed seeds of Canola oil, Olive oil, Soya oil, fish meal, food waste, animal fat, oily waste. Max capacity: 40 GPM. Actual capacity is application specific and can be as low as 2 gpm depending on percent solids in feed, particulate micron size, viscosity etc. Now available Alfa Laval NX 620, Sharples P35000, PM 35000 decanters |
|
Also Available
New additions SOLD
|
SUBMIT FORM to request a quick quote or informationNote: If the "Submit Form" does not work, please email your inquiry to centrifuge@marstechusa.com |
|
Home | All Centrifuges | Basket Centrifuges | Decanter Centrifuges | Disc Bowl Centrifuges | Centrifuge Applications | Biodiesel, Green Fuel | Fasteners, Cold Header Lube | Gas Turbine Fuel Treatment | GaAs Recovery | Oilfield, Refinery Solids Control | Photonics, Optics, Quartz | Paint Booths, Vibratory Finishing | Alfa Laval BTPX 205 Biotech | Alfa Laval LAPX 404 Pharmaceutical| Alfa Laval MAB, 103 MAB 104, OCM 103, 104 | Alfa Laval Alfie 400 | WSPX 204, Alfa Pure Z3 Coolant Centrifuge | CF 105G, TSK 150A , CF 155 | Sharples P660, P 600 Decanter | Used Centrifuges | Surplus Centrifuges | Centrifuge Parts | Centrifuge Repair | Information Request | Contact us Mars TechDivision of Kendale and Co.,Inc August 25, 2015 5:51 PM Copyright © Mars Tech 2004 - 2014 |